1. Cut out the dashed circles above using a razor blade or scissors.
2. Remove the knob(s) by pulling them upward from the console; A credit card can help pry it up, and if it's extra stubborn, you can use a flathead screwdriver.
3. Make sure the console is squeaky clean and dry!
4. Peel the backing off of the sticker and line it up evenly over the console.
5. Start at the bottom pressing around the Spray Angle Adjuster and then work your way up to avoid bubbling.
6. Press the knobs back onto the console.
7. All done!

You can use a credit card or something flat to slide underneath the knobs and pop them off. Then just push them back on once you’ve applied the sticker! Check out our step by step video tutorial here.

Not to worry, you can slowly peel it off and re-apply!

You sure can! Take your knob(s) off (just as you did when putting the sticker on), then carefully peel it off from the corner and pull slowly, and that will leave your TUSHY in its original condition. It will not peel the paint off.

Vinyl and adhesive.